Continuous Emissions Monitors

California Analytical Model 100 Oxygen Analyzer

The California Analytical O2 analyzer is an excellent O2 analyzer for any CEM system.

The unit is lightweight, 19” rack mountable, and has excellent reliability. You can choose between the low cost of a fuel cell detector or the long-term life-span of a paramagnetic detector. Calibration values are adjusted via the zero and span pot knobs. The unit is complete with an internal sample pump and digital display.

Manufacturer California Analytical Instruments
Analysis Method Galvanic Fuel Cell or Paramagnetism
Range 0-5, 10, 25%
Response Time 90% of full scale in < 5 seconds
Sample Flow Rate 1 liters/minute Noise < 1% of full scale
Zero & Span Drift < 1% of full scale per 24 hours
Analog Output 0 to 10 VDC and 4 to 20mA
Power 115VAC
Dimensions 5 1/4”H x 19”W x 8”D
Weight 10 lbs.

Also available:
* California Analytical Model 100 carbon dioxide analyzer
* California Analytical Model 200P oxygen / carbon dioxide analyzers
* California Analytical Model 300P oxygen / carbon dioxide / carbon monoxide analyzers

California Analytical Model 100P O2 Analyzer
The CAI Model 100P O2 analyzer employs the field proven paramagnetic sensor for O2 analysis. The instrument is provided with an internal adjustable sample pump, front panel zero and span potentiometers, and a wide variety of range selections.

Ranges	0-1, 5, 10, 15, 25, 40 and 100% by volume (specify)
Detection Method	Paramagnetic
Sample Gas Input	1/4-inch Tube; 0.5 to 2 lpm
Analog Outputs	0-10 Vdc, 4-20mA (others upon request)
Power Requirement	110 VAC/60 Hz
Shipping & Weight	32x25x14 – 55 lbs

California Analytical Model 100 CO2 Analyzer
The CAI Model 100 CO2 analyzer employs a non-dispersive infrared detector with optical filter for CO2 analysis. The instrument is provided with front panel zero/span potentiometers and excellent dynamic range selections.

Ranges	0-10, 20, 40% by volume
Detection Method	NDIR
Sample Gas Input	1/4-inch Tube; 0.5 to 2 lpm
Analog Outputs	0-10 Vdc, 4-20mA (others upon request)
Power Requirement	110 VAC/60 Hz
Shipping & Weight	32x25x14 – 55 lbs

California Analytical Model 200P O2/CO2 Analyzer
The CAI Model 200P is a combination O2/CO2 analyzer that employs a paramagnetic sensor for O2 analysis and an NDIR detector for CO2 analysis. The instrument is provided with an internal adjustable sample pump, front panel zero and span potentiometers, and a wide variety of range selections.

Ranges	O2: 0-1, 5, 10, 15, 25, 40 and 100% by volume (specify) CO2: 0-20, 40% by volume
Detection Method	Paramagnetic (O2), NDIR (CO2)
Sample Gas Input	Single 1/4-inch Tube; 0.5 to 2 lpm
Analog Outputs	Independent 0-10 Vdc, 4-20mA (others upon request)
Power Requirement	110 VAC/60 Hz
Shipping & Weight	32x25x14 – 67 lbs

California Analytical Model 300P O2/CO2/CO Analyzer
The CAI Model 300P is a multiple detector O2/CO2/CO analyzer that employs a paramagnetic sensor for O2 analysis and an NDIR detector for CO2 and CO analysis. The NDIR detectors employ optical filtration to negate cross-interferences. The instrument is provided with an internal adjustable sample pump, front panel zero and span potentiometers, and a wide variety of range selections.

Ranges	O2: 0-1, 5, 10, 15, 25, 40 and 100% by volume (specify) CO2: 0-20, 40% by volume (typical) CO: 0-200, 500, 1000, 2500 ppm (depends on unit)
Detection Method	Paramagnetic (O2), NDIR (CO2, CO)
Sample Gas Input	Single 1/4-inch Tube; 0.5 to 2 lpm
Analog Outputs	Independent 0-10 Vdc, 4-20mA (others upon request)
Power Requirement	110 VAC/60 Hz

:: Back to Continuous Emissions Monitors ::