CEMS Accessories

Cherokee Flow Control Panel
The Cherokee Flow Control Panel is a 19 inch rack mountable device designed to distribute various gas streams to the components of a CEM system. The basic panel accepts 12 calibration gas inputs and a single sample gas input. The panel provides control to 4 instruments via solenoid valves and controllers. The panel can be controlled remotely via a Strata Data Acquisition System.




Basic Flow Panel
* Solenoid Valve Controlled
* 12 Calibration Gas Inputs
* Supports 4 Instruments
* Manual or Automatic Mode

Power Requirements 115 Volts AC Shipping
Size and Weight 1 Package and 10 lbs

Helpful Hint The Cherokee Flow Control Panel can be custom configured to meet your sampling needs. Note that custom configurations are a purchase only option. Please contact your Cherokee representative to find out more about our flow control panels.


Heated Sample Lines
Cherokee heated sample lines are available in lengths of 100’, 50’ and 25’. Heated lines incorporate a 3/8” Teflon tube for sample transport and a 1/4” Teflon tube for calibration gas transport.



All heated lines include:
* 100’, 50’ or 25’ Heated Line
* 20-Amp, Ventilated Heat Controller

Power Requirements 115 Volts AC
Shipping Size & Weight 1 Package / 50-75 lbs

Helpful Hint Sample lines are precleaned prior to each shipment. Gas Chromatograph lines are cleaned down to <2 ppm total hydrocarbons. Please do not leave a line coiled while heating as the overwrap may melt.

Standard Heated Sample Line
Cherokee standard heated sample lines include stainless steel over braided TFE Teflon tubes for sample extraction and calibration gas injection. Line temperature is regulated via an integral Type K thermocouple and an included digital heat controller. Our heated lines are designed to maintain 300oF at –20oF ambient temperature and have a maximum temperature limit of 400oF. All lines are certified clean at <2 ppm for both THC (as CH4) and CO prior to shipment.

FTIR Heated Sample Line
Cherokee FTIR heated sample lines incorporate removable core PFA Teflon tubing for sample extraction and calibration gas injection. Line temperature is regulated via an integral Type K thermocouple and an included dual-channel digital heat controller. Our FTIR heated lines are designed to maintain 350oF at 0oF ambient temperature and have a maximum temperature limit of 400oF. All lines are certified clean prior to shipment.